Contact Us
To speak to a specialist, call: 01572 729412
Email: Sales@rutlandpumps.co.uk
For frequently asked questions please scroll down:
Drop us an email
What Nozzle size do i need? You need to know the flow and pressure of the machine, and then use a nozzle chart to find the correct size orifice. It is important to remember with a Surface Cleaner which has two nozzles, you half the final orifice size.
What is a Kew Fitting? It is a type of Quick release coupling, usually fitted to lances, which allows you to change your accessory or lance tube without having to turn off the pressure washer.
How do i start my machine? Make sure the fuel tap is in the ON position, the throttle needs to be set to full, and in cold weather the choke is applied. Turn on the Ignition Switch and pull the recoil or turn the key.
What fittings do i have? head over to our website where this information will be located under the Fittings Information Page.
What is the difference between LPM and Bar? LPM stands for Litres per minute, and can also be shown as GPM (US), Bar is a measure of pressure which can also be shown as PSI.
How often should i service my Pressure Washer? We recommend Oil Changes every 100 hours of use or every 6 months.
What to do if my Lance is leaking? Check to see if the O ring is missing from the Mini quick release at the end of the Lance where you attach the Nozzles. If the O ring isn't missing then you need to re PTFE the thread where the leak is coming from.
What is the difference between Nozzle Spray Patterns? There is more information on Nozzle Spray patterns listed on the website, follow using this link:
Which Nozzle do i need for Roof Cleaning?
How to check my Inlet Filter in my Power Washer for low pressure? We have trouble shooting charts that can be found here:
How to check the unloader if water is bypassing?
Which thread size do i need? There is a chart containing this information that can be found here:
How does the Boiler connect to my Pressure Washer?
What is the difference between the surface cleaners?
How do the procannon, Projet and Profoam work?
What is the difference between the Chemical Applicators?
Which Size Surface cleaner will work best with my Pressure Washer?